Content:
Consumers perceive leather as a durable and natural product. To support this positive image, car manufacturers have set demanding performance profiles addressing wear, emissions and sustainable
manufacture. Poor performance of auto leather becomes visible as the polymeric finishing coat wears off or cracks over time. Therefore ageing property is seen as a representative key performance parameter and is determined by checking how flexible and strong a polymer coating remains after leather has been exposed to light, heat and humidity for a given time. Ageing of leather is complex to determine and depends on various parameters and requires a full system approach .
In a first step different type of crusts (wet-blue, wet-white) were prepared and finished with a standard polyurethane coating. It turned out that the selection of the right fat liquors and tanning agents as well as the presence of vegetable tannins play an important role. On top of this the effective use of proper protective chemicals like anti-oxidants is needed.
In a second approach the polymer coating itself was studied and optimized with regard to aged flexing and abrasion. Parameters like polymer type, crosslinking, application technology, coating thickness and impact of additives were investigated and tested when applied on the best crust leathers selected from part 1 of this work. Results show that not only is the right selection of polymers critical but also so is the way the coat is being applied . Furthermore coating thickness greatly defines wear (abrasion), lightfastness and ageing properties. Additives like dulling agents, levelers, feel agents, waxes ,fillers although needed can weaken the integrity of the polymer matrix and consequently reduce physical and chemical fastness properties. This may also apply to a certain extent to protective additives such as anti-oxidants and UV stabilizers, but when used properly their advantages outweigh the potential disadvantages. As to application, special emphasis is given to transfer coating technology which can provide advantages in application and quality consistency but also with regards to fastness properties such as wear and ageing.
Take-Away:
- crust leather has a critical impact on performance of finishing coat of automotive leathers and requires careful selction of products and use of protective chemical
- polymer selection and use of protective chemical play an important role for achieving good aged flexing performance
- type of application of finishing coat on auto leather further determines the performance of coating
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:34148 |
| Date | 25 June 2019 |
| Creators | De Vecchi, S., Christner, Jurgen, Summa, S., Rama, A., Ampuero, R., Rinaldi, D. |
| Contributors | International Union of Leather Technologists and Chemists Societies |
| Publisher | Verein für Gerberei-Chemie und -Technik e. V., Forschungsinstitut für Leder und Kunststoffbahnen (FILK) gGmbH |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | urn:nbn:de:bsz:14-qucosa2-340872, qucosa:34087 |
Page generated in 0.0022 seconds