Zinc phosphate conversion coating has been applied to improve the corrosion resistance and paint adhesion. However, zinc phosphate crystals dissolve in a highly alkaline environment, which reduces the corrosion resistance of base metal. To improve the phosphate stability in a highly alkaline environment, a post-rinse treatment has been applied to phosphate coating by rinsing with an aqueous solution which contains certain anions or cations. Chromatepost-rinse treatment is the most widely used method and has shown a great improvement in corrosion resistance. But, due to the environmental problems caused by chromate ions, non-chromate post-rinse treatment should be developed, which has equal or better corrosion resistance than does chromate post-rinse treatment. In this research, inorganic silicate with addition of Ca²⁺, Ba²⁺, Ni²⁺, Mg²⁺, has been extensively evaluated together with silane solution, γ -aminopropyltriethoxysilane ( γ -A.P.S., NH₂(CH₂)₃Si(OC₂H₅)₃), which was applied after the post-rinse treatment. The evaluation was carried out by the highly advanced surface analysis techniques such as SEM/EDX, AES, SIMS, and XRD and polarization measurements. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/80009 |
Date | January 1987 |
Creators | Yoon, Tae-Ho |
Contributors | Materials Engineering |
Publisher | Virginia Polytechnic Institute and State University |
Source Sets | Virginia Tech Theses and Dissertation |
Language | en_US |
Detected Language | English |
Type | Thesis, Text |
Format | x, 100 leaves, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 17012875 |
Page generated in 0.0127 seconds