Return to search

Three-dimensional finite element stress analysis of post-core restored endodontically treated teeth

Determination of the stress distributions in post-core restored endodontically treated teeth is challenging due to the fact that the post and core systems, the root and its canal, and the bony structures supporting the root have small dimensions and are structurally complex. In this research, a 3D finite element model was developed to evaluate the stress distributions in a post-core restored endodontically treated maxillary incisor under various static loads. The physical model includes dentin, PDL, bone, post, core, gutta percha and crown. All materials are assumed to be homogenous, isotropic, and linear elastic. The effects of various factors on the stress distributions are investigated through simulations. These factors include post materials, post and core combinations, ferrule heights, post and dentin gaps at the coronal entrance of the canal, and canal diameters.

It has been found that the horizontal loading is the most dangerous, which causes the highest stresses in dentin and posts, followed by the oblique loading and the vertical loading. The above listed factors, such as post materials, post and core combinations, ferrule heights, post and dentin gaps at the coronal entrance of the canal, and canal diameters, do not change the stress distributions and magnitudes significantly under horizontal and oblique loading. However, the stresses are sensitive to the above factors under the vertical loading, and it has been found that the stress distributions in both dentin and the post are the most uniform without stress concentrations when the elastic modules of the post and the core are similar to that of dentin. Regarding the effects of the gaps at the cervical region on the stress distributions in dentin, the high stresses at the apical portion of the root and the bottom of the gaps decrease as the increase of the depth of the gap under vertical loading. Overall, the sharp angle and notch of the gap at the coronal entrance of the canal should be avoided in tooth restoration since they can cause stress concentrations. On the effects of the ferrule heights, the changes of the stress distributions in dentin and the post are insignificant except that higher ferrule shows lower stresses at the top of the ferrule. Regarding the effects of the diameters of the posts, the results show that although the posts with large diameters support more loads, they cause high stress concentrations at the apical portion of the root, which is not desirable. / October 2005

  1. http://hdl.handle.net/1993/115
Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:MWU.anitoba.ca/dspace#1993/115
Date04 May 2005
CreatorsSong, Guang-Quan
ContributorsDr. Christine Q. Wu (Mechanical and Manufacturing Engineering), Dr. Peter.T. Williams (Restorative Dentistry) Dr. Lawrence.W. Stockton (Restorative Dentistry) Dr. J.R. Cahoon (Mechanical and Manufacturing Engineering) Dr. Nipon Rattanawangcharoen (Civil Engineering)
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Languageen_US
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Format1103687 bytes, application/pdf

Page generated in 0.0017 seconds