This thesis deals with the stress-strain analysis of thick-walled pipe parts. The dimension series (characterized by the D/d ratio) of three components are solved, then a direct tube, a torus with constant wall thickness (arcus) and a torus with variable wall thickness (bend). At first, the internal pressure amount, when a fully plastic state for these components is created, is solved. The amount of the limit pressure is determined analytically, numerically and by appropriate normative relations. The results and stress diagrams of individual solutions are mutually compared. Furthermore, these components are solved in the creep and are exposed to the maximum allowable normative internal pressure for 200,000 hours according to the standard – the operating time of components. The place of the maximum equivalent creep strain and the place of the maximum equivalent stress is examined. In these places the principal stresses are depicted depending on the D/d ratio. The results and stress diagrams of individual dimension series are mutually compared. From the available literary sources the condition of the limit state reach is chosen, according to which the evaluation of the limit state reach for individual components is carried out.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228762 |
| Date | January 2009 |
| Creators | Zouhar, Michal |
| Contributors | Petruška, Jindřich, Hlavoň, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds