The presented diploma thesis deals with an innovative material test, so called Small Punch Test. There are main principles, advantages and limitations of the test stated in the thesis. There are stated also correlation procedures in order to obtain standard mechanical properties. A test fixture design has been done in order to perform test procedures at temperature range from 80 to 25 °C. Twelve experimental curves have been obtained from the test and typical quantities have been evaluated. The different accuracy of correlations with standard mechanical properties has been obtained using different correlation equations.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:254313 |
Date | January 2016 |
Creators | Závodský, Peter |
Contributors | Pantělejev, Libor, Válka, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.3662 seconds