As same as other countries in the world, China is also facing the problem of a severe shortage of energy. Specifically, the demand for natural gas is rising explosively after the energy consumption structure has changed from oil to gas. Due to various reasons and motivations, shale has been considered having great reserves and believed in alleviating the energy crisis. Nevertheless, the massive investment in developing shale has a disappointing interest with low-yielding production. Scholars have done many researches and experiments for investigating the causes and increasing the productivity of shale formation, in field and in laboratory respectively. Based on the statistics, more details, and further discussion, in this dissertation a probable method for more effectively producing was demonstrated.
Although the hydro-fracturing technology has been conducted in field frequently, sometimes the decrease of permeability has been observed after the treatment. To figure out this phenomenon, the investigation started from the basic characterization of matrix. Believed in the most component in shale, quartz consisted of silica which could dissolve in fluid. Been assigned as variables, temperature, pH, and salinity have been implemented for explanation of dissolution. Temperature played a great role in the process. Combined with confining pressure, the reconsolidation happened inside samples. Through more experiments the mechanism of reconsolidation has been discovered that both confining pressure and temperature are necessary for gelling in fracture.
Perspective on the whole formation, well logs were a super supplement to laboratory experiments. It serviced not only a further confirmation, but also pointed out the relationship between desorption capacity and different components. Samples from upper and lower formations have been used for going further. The exchange which exists between N2 and CH4 could be a great idea to exploit gas from reservoir. Feldspar supported space for adsorbed gas, and it was also easy to release. In contrast, the organic matter in which a network of pores developed has ability to trap the gas deeply because of the specific surface area. Quartz had positive effect on production because of containing the organic matter, while the influence of clay minerals on adsorption and desorption could be neglected.
Based on the analysis of reconsolidation and desorption, an idea has been conceived using foam as fracturing fluid for increasing gas production. Compared to the pure fluid, foam has less water, which could prevent the reconsolidation. Nitrogen could be the gas to foam. The exchange between N2 and CH4 will increase the production of gas. In order to serve the condition that increases the time of exchange and makes negative effect on reconsolidation simultaneously, the foaming test with ABS and K12 has been evaluated first. For better stability of foam more experiment have been done. Three formulas were recommended which could keep the balance between the increasing viscosity and decreasing volume.
The work interpreted in this thesis has enhanced our understanding of microscopic properties of shale and was expected to make contribution to further research of fracturing and production design.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:72470 |
| Date | 04 December 2020 |
| Creators | Liu, Yong |
| Contributors | Amro, Mohd, Konietzky, Heinz, Zhang, Xiaoxi, Technische Universität Bergakademie Freiberg |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds