Return to search

Investigation of Ultimate Bending Strength of Steel Bracket Plates

Currently, the design model for flexural rupture of an eccentrically loaded bracket plate is based on the material tensile rupture strength times the net elastic section modulus. Different bolt and plate sizes were tested to determine if this model is correct. It was found that the current model is conservative and that the material tensile rupture strength times the net plastic section modulus is a superior design model. Also, limited finite element modeling was performed to predict the elastic stiffness of such connections. The resulting data correlates well with test results, and confirms that most of the connection ductility comes from bolt plowing. These results can be used for splice plate connections in cantilever construction, as well. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/31172
Date15 February 2005
CreatorsMohr, Benjamin Alan
ContributorsStructural Engineering, Murray, Thomas M., Rojiani, Kamal B., Easterling, William Samuel
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
Relationetd.pdf, arabicpages.pdf

Page generated in 0.0018 seconds