Content:
The aim of this desk study is to compare consumption of thermal energy in temperate vs. (sub)tropical climate for two representative processes: float heating (bating and dyeing) and chamber drying, with the view of contributing towards overall assessment of thermal energy consumption for tanneries operating under rather different conditions.
The energy consumption is calculated for 1 t of wet salted hides and assuming that 1000 kg of wet salted weight corresponds to 1100 kg of pelt weight containing 838 kg of water and 262 kg of collagen subsequently segregated into grain leather and usable splits. Float rates (200% on pelt/shaved weight), average inlet water temperatures (15 oC vs. 25 oC), process float temperatures for bating (35 oC) and dyeing (60 o C) have been defined.
Similarly, for computation of thermal energy for chamber drying, identical initial (45 %) and target leather humidity (20 %) are set and average respective fresh air temperature (15 oC vs. 30 oC) and fresh air relative humidity (50% vs. 70%) estimated and operating conditions such as exhaust air temperature and relative humidity defined.
Based on such parameters and assumptions, specific ratios for thermal energy consumption for float heating (bating & dyeing) and for chamber drying have been calculated and comparisons made; the results might not quite coincide with common perceptions.
The energy needs computed are net amounts, i.e. regardless of the source and without taking into account any losses and disregarding energy consumption for ambient heating and/or cooling. Thus, the total energy needs are much higher. The ratios computed for grain leather are valid for split leather as well.
However, if the solar energy is used to support water heating, the conditions in the tropic zone are substantially more favourable, due to higher insolation and higher efficiency factor (i.e. difference of the final vs. inlet water temperature).
Take-Away:
Based on such parameters and assumptions, specific ratios for thermal energy consumption for float heating (bating & dyeing) and for chamber drying have been calculated and comparisons made; the results might not quite coincide with common perceptions.
However, if the solar energy is used to support water heating, the conditions in the tropic zone are substantially more favourable, due to higher insolation and higher efficiency factor (i.e. difference of the final vs. inlet water temperature).
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:34137 |
| Date | 28 June 2019 |
| Creators | Buljan, Jakov, Bosnić, M., Král’, I. |
| Contributors | International Union of Leather Technologists and Chemists Societies |
| Publisher | Verein für Gerberei-Chemie und -Technik e. V., Forschungsinstitut für Leder und Kunststoffbahnen (FILK) gGmbH |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | urn:nbn:de:bsz:14-qucosa2-340872, qucosa:34087 |
Page generated in 0.0534 seconds