The Master´s thesis deals with the fluid layer, with types of fluidized layer and with problems which can be solve during design of new fluidized beds. The aim was find the fluidized grid, which is the best form economical and technological point of view. In this work are compared three fluidized grids. The first was part of submission. Next two additional types were then proposed by the author of thesis. Proposals grids are discussed in detail from the design phase, through the modeling and subsequent simulation part in a computer program. The results of simulation are pressure losses. Which are compared with the recommended interval values. Afterward these tested beds are put through technical and economic analysis. The result is grade which is met both requirements.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228942 |
Date | January 2010 |
Creators | Voráč, Petr |
Contributors | Vondál, Jiří, Nekvasil, Richard |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds