Due to the rising demand of light-weight constructions as well as the conservation of resources, the density and weight of thermoplastic parts could be influenced significantly by using the thermoplastic foam injection molding process. The structure of the foam injection molded part, which typically means solid surface layers and a cellular core, usually results in a weight saving. Furthermore the materials structure leads to an increasing of the specific bending stiffness with a simultaneous low tendency to warp.
The present study was aimed to analyze the interactions between microcellular structure, joining process and the resulting mechanical properties of the molded part. Therefore, the microcellular injection molding process (MuCell®) as well as the vibration welding were used. Whereas the established welding processes for solid injection molded parts have already achieved a high degree of perfection within the last decades, the joining of microcellular thermoplastics entails several specific characteristics, because the injection foaming process highly influences the basic material properties. In contrast to solid materials, the weld seam properties after joining are mainly affected by the design constraints of the microcellular structure.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:20815 |
| Date | 08 November 2017 |
| Creators | Heidrich, Dario, Brückner, Eric, Gehde, Michael |
| Publisher | Technische Universität Chemnitz |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:Other, info:eu-repo/semantics/other, doc-type:Text |
| Source | 15th International Conference on Advances in Foam Materials & Technology, October 11 - 12, 2017 |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0216 seconds