ABSTRACT
A LABORATORY MODEL STUDY ON SETTLEMENT REDUCTION Effect OF STONE COLUMNS IN SOFT CLAY
Sü / nnetcioglu, Mehmet Emrah
M.Sc., Department of Civil Engineering
Supervisor: Prof. Dr. Mehmet Ufuk Ergun
August 2012, 177 pages
An experimental study was conducted in order to examine settlement reduction ratios of footing supported by both floating and end bearing type of stone columns. For the floating types, tests were done with varying column lengths of one and two widths of footing (L=B,2B).
Tests were conducted in 200 mm* 200 mm* 200 mm cubic loading tanks. The reinforcement effect was achieved by the installation of four stone columns with 20 mm diameter under 70 mm* 70mm model footing. Parameters such as area replacement ratio (a_s), loading plate dimensions, consolidation and vertical pressures applied, and the relative density (D_R) of the granular column were kept constant, the column length (L) was set as the only variable in the experimental tests conducted. In the tests, footing settlements together with subsurface settlements at depths equal to footing width (B) and two times the footing width (2B) were measured by specially designed telltales.
The settlement reduction ratios both at surface and subsurface were evaluated in order to determine the effect of column length on settlement improvement. It has been found out that as the column length increases the settlement reduction ratios decrease for all depth intervals. However, there exists a threshold column length (L=2B), beyond which the composite ground demonstrates little settlement improvement.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12614558/index.pdf |
| Date | 01 August 2012 |
| Creators | Sunnetcioglu, Emrah Mehmet |
| Contributors | Ergun, Ufuk Mehmet |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0021 seconds