Return to search

Estimation of DBH Using Tree Variables Derived from Aerial LiDAR for Ford Forest, Baraga, Michigan

<p> This study implemented LiDAR (Light Detection and Ranging) remote sensing technology and applied ITD (Individual Tree Detection) methods as an approach to estimate some essential tree variables, such as DBH (Diameter at Breast Height), height, volume, and biomass for Ford Forest Research Center in Upper Peninsula, Michigan. There were 34 deciduous (1 bigtooth aspen, 9 red oaks, 20 sugar maples, 2 white birches, and 2 yellow birches) and 17 coniferous (2 eastern hemlocks, 11 red pines, and 4 white pines) subject tree species. There were two different available LiDAR datasets from the same area that were collected in 2011 and 2017. Height measurements were done at 96% and 97% accuracy for hardwood and softwood tree species, respectively. </p><p> Several other tree variables derived from LiDAR point cloud were used to estimate DBH by using regression analysis for both 2017 and 2011 datasets. Estimation equations were tested on the other dataset. The best-fitted formula was 2017&rsquo;s, with 0.55 adjusted R&sup2; and less than 0.0001 p-values on 2017 LiDAR data while 0.42 adjusted R&sup2; and less than 0.0001 p-values on 2011&rsquo;s dataset. Some additional analysis that includes calculating PRMSE (Predicted Root Mean Square Error), BIAS (Mean Error), and MAD (Mean Absolute Difference) have been applied. The equation that was generated by using data from 2017 has &ndash;0.57 BIAS for Hardwood and 1.13 BIAS for softwood. That result indicates that the equation has &ndash;0.57 centimeters (cm) estimation error for hardwood and 1.13 cm for softwood on DBH estimations. </p><p>

Identiferoai:union.ndltd.org:PROQUEST/oai:pqdtoai.proquest.com:13422276
Date16 February 2019
CreatorsDemiraslan, Tugay
PublisherMichigan Technological University
Source SetsProQuest.com
LanguageEnglish
Detected LanguageEnglish
Typethesis

Page generated in 0.0017 seconds