Taking into account modern technology solutions has been selected die forging of the wheel hub of automobile steel 14220 (DIN 16MnCr5) about the serial 50000 pcs. Based on the literature study and practical experience has been solved forging process, including technological calculations, engineering drawings and results of simulations of the forging process performed by the Qform software tool. A tool was designed to be made of 19552 grade alloy tool steel. The forged piece is to be forged on an LZK 1000 crank press with the nominal forming force of 10 MN manufactured by Šmeral Brno. The stock is divided with shears from bar 45 mm 6 m long to bar 89.5 mm long.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231004 |
| Date | January 2013 |
| Creators | Vraštiak, Michal |
| Contributors | Psík, Eduard, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds