The thesis presents an analysis and optimization of the manufacturing process of a part using the technology of parallel hydroforming. Two circular blanks made of DC01 steel with a thickness of 1 mm serve as a semi-manufactured part. In one of the blanks, the supply of the forming medium is constructed using Flowdrill technology. Subsequently, the two blanks are laser welded together and then formed. Numerical simulation using PAM-STAMP software was used to analyse the manufacturing process. This analysis provided information on wall thinning, deformation size, critical points on the product and springback. The numerical simulation was verified on the basis of comparison with an experiment. The criterion for verification was the course of the thickness of the part. Based on the results of the simulation, an optimization is performed in the thesis. It consists in determining the minimum required pressure of the forming medium for pressing the part, particularly for different distances between the two formed sheets.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417082 |
Date | January 2020 |
Creators | Chrz, Jan |
Contributors | Jopek, Miroslav, Řiháček, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds