Diploma thesis deals with a design and manufacture of oil cooler by technology Selective Laser Melting for Formula Student. The main goal of the design is to ensure optimal oil circuit cooling at a minimal mass. The design of manufactured oil cooler is based on a plate heat exchanger concept with optimized intakes by CFD simulations and heat exchange body with fins of thickness 0.17 mm. An analytical model was created. SLM process parameters were optimized for a thin walls printing, Subsequently, a fabrication of testing parts was finished for measuring pressure drops and performances of micro heat exchangers. Results were used for an accuracy improvement of the analytical model and for consequent optimization of heat exchange surface. Afterwards optimization was executed for inlets and outlets by using flow simulations. A prototype was built and verified on a test stand. Performance of the designed oil cooler is 4.5 kW for race mode, where temperature drop of oil circuit is 22 °C. The lightweight design weighs 320 g, which reduces more than 47 % of a current oil-air cooler weight. Furthermore, a centre of gravity is decreased by designed placement of the cooler.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399336 |
| Date | January 2019 |
| Creators | Březina, Josef |
| Contributors | Dočekalová, Kateřina, Koutný, Daniel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds