Return to search

PROBABILISTIC ANALYSIS OF FRACTURED ROCK MASSES.

Stability analysis of rock masses composed of small, discrete rock blocks that are in-place and interlocked should consider four components of failure: (1) Sliding between blocks. (2) Shearing through rock blocks. (3) Rolling blocks in a shear zone. (4) Crushing of rock blocks. Statistical rock mass description is used to define the characteristics of the rock blocks and the block assemblage. Clastic mechanics is one method of predicting stresses produced by the arrangement of rock blocks and the loading conditions. Failure begins at a point of maximum stress behind the slope. Progression of the failure is assumed if the first block fails because adjacent blocks will become overstressed. The location of the point of maximum stress is determined from the shape and arrangement of the constituent rock blocks. Because strength is mobilized block-by-block rather than instantaneously along a continuous shear surface, sliding between blocks shows less stability than a soil rotational shear analysis or a rigid block sliding analysis. Shearing through rock blocks occurs when maximum shear stress exceeds rock shear strength. Crushing of rock blocks is predicted if the normal stress exceeds the compressive strength of the rock block. A size-strength relationship is combined with the rock block size distribution curve to estimate crushing strength. Rotating blocks in a shear zone have been observed in model studies and as a mechanism in landslides. Stability analysis assumes that the rock mass is sufficiently loosened by blasting and excavation to allow blocks to rotate. The shear strength of rolling blocks is dynamic shear strength that is less than static sliding shear strength. This rolling mechanism can explain release of slope failures where there are no other obvious structural controls. Stability of each component of rock mass failure is calculated separately using capacity-demand reliability. These results are combined as a series-connected system to give the overall stability of the rock mass. This probability of failure for the rock mass system explicitly accounts for the four components of rock mass failure. Criteria for recognizing rock mass failure potential and examples applying the proposed method are presented.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/184249
Date January 1987
CreatorsSAVELY, JAMES PALMER.
ContributorsDaemen, Jaak J. K., Farmer, Ian, Glass, Charles E., Nowatzki, Edward, DeNatale, Jay S.
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
LanguageEnglish
Detected LanguageEnglish
Typetext, Dissertation-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0021 seconds