This thesis presents research toward the development of a simple inexpensive fracture toughness tool for polymeric materials. Experiments were conducted to test the specimen configuration and the fracture toughness tool against an established ASTM standard for polymer fracture toughness, D5045, and a commonly used four-point bend method. The materials used in this study were polycarbonate and high density polyethylene. Reductions in both the production time and the variability resulting from the preparation of the specimens were addressed through the use of specially designed fixtures. The effects from the razor cut depths used in the chevron notch were compared to the fracture toughness values obtained in order to determine the effect upon the validity of the fracture toughness.
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc278473 |
| Date | 08 1900 |
| Creators | Marnock, Patrick J. (Patrick Joseph) |
| Contributors | Foster, Phillip R., Watt, George William, D'Souza, Nandika Anne, 1967- |
| Publisher | University of North Texas |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | vii, 84 leaves : ill., Text |
| Rights | Public, Copyright, Copyright is held by the author, unless otherwise noted. All rights reserved., Marnock, Patrick J. (Patrick Joseph) |
Page generated in 0.0019 seconds