A swirl injector for a rocket engine being developed by \emph{AESIR} (Association of EngineeringStudents in Rocketry) was simulated with different geometric parameters. The swirl injector is usedto atomize the ethanol used as fuel and to create a spray that mixes well with the oxidizer withinthe combustion chamber. Inlet slot angle (90, 75, 60 and 45 degrees), swirl chamber length (15, 20and 25 mm) and outlet orifice diameter (3, 6 and 9 mm) were examined.Previous studies in swirl injectors show that CFD can be used to analyze the flow in such aninjector, furthermore theoretical models exist that can predict some of the general characteristicsof the flow. Previous studies have also simulated transient behavior and flow features effectingbreakup of fuel flowing through a swirl injector.A steady state simulation using Volume of Fluid (VOF) multiphase modeling and $k$-$\omega$ \emph{SST}turbulence modeling was used to simulate the swirl injector intended for the rocket engine. It wasfound that a wider outlet orifice would give a wider cone angle of spray. This is desirable in thecurrent rocket engine design as it will promote greater mixing of fuel and oxidizer higher up in thecombustion chamber. No large variances was observed when different inlet slot angles was simulated. Ashorter swirl chamber length reduced the amount of losses in energy due to viscous forces. The flowafter the outlet orifice was not simulated so the effect of turbulence kinetic energy and energylosses outside of the swirl injector have not been analyzed, previous studies have indicated thatturbulent kinetic energy does have an effect on the breakup and atomization of the fuel.It was concluded that using a wider outlet orifice of 9 mm gave the best results out of the differentgeometric parameters analyzed and the swirl chamber length should be a short as possible.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-314553 |
Date | January 2022 |
Creators | Vejlens, Emil, De Jourday, Dylan |
Publisher | KTH, Skolan för teknikvetenskap (SCI) |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | TRITA-SCI-GRU ; 2022:096 |
Page generated in 0.0117 seconds