Chloride levels are increasing in some water supplies around the country due to use of road salts and seawater intrusion, which can increase the chloride-to-sulfate mass ratio (CSMR) and trigger serious water lead contamination from galvanic lead solder: copper pipe corrosion. Previous attempts to control this problem through simple water chemistry modifications were unsuccessful, but in this work a combination of zinc orthophosphate and moderate alkalinity mitigated lead release in testing at two utilities. Either zinc alone or phosphate alone were irrelatively ineffective, but the combination of zinc orthophosphate reduced lead leaching by 54-99% (compared to the control without inhibitors) if alkalinity was above about 55 mg/L as CaCO3. These results may help mitigate future lead in water contamination events. / MS
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/93931 |
Date | 28 March 2018 |
Creators | Bradley, Taylor Nicole |
Contributors | Environmental Science and Engineering, Edwards, Marc A., Sarver, Emily A., Parks, Jeffrey L. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis |
Format | ETD, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0022 seconds