Return to search

INFORMATION EXTRACTION IN CHROMATOGRAPHY USING CORRELATION TECHNIQUES.

While research into improving data quality from analytical instrumentation has gone on for decades, only recently has research been done to improve information extraction methods. One of these methods, correlation analysis, is based upon the shifting of one function relative to another and determining a correlation value for each displacement. The cross correlation algorithm allows one to compare two files and find the similarities that exist, the convolution operation combines two functions two dimensionally (e.g. any input into an analytical instrument convolves with that instrument response to give the output) and deconvolution separates functions that have convolved together. In correlation chromatography, multiple injections are made into a chromatograph at a rate which overlaps the instrument response to each injection. Injection intervals must be set to be as random as possible within limits set by peak widths and number. When the input pattern representation is deconvolved from the resulting output, the effect of that input is removed to give the instrument response to one injection. Since the operation averages all the information in the output, random noise is diminished and signal-to-noise ratios are enhanced. The most obvious application of correlation chromatography is in trace analysis. Signal-to-noise enhancements may be maximized by treating the output data (for example, with a baseline subtraction) before the deconvolution operation. System nonstationarities such as injector nonreproducibility and detector drift cause baseline or "correlation" noise, which limit attainable signal-to-noise enhancements to about half of what is theoretically possible. Correlation noise has been used to provide information about changes in system conditions. For example, a given concentration change that occurs over the course of a multiple injection sequence causes a reproducible correlation noise pattern; doubling the concentration change will double the amplitude of each point in the noise pattern. This correlation noise is much more amenable to computer analysis and, since it is still the result of signal averaging, the effect of random fluctuations and noise is reduced. A method for simulating conventional coupled column separations by means of time domain convolution of chromatograms from single column separations is presented.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/187978
Date January 1985
CreatorsFRAZER, SCOTT RAYMOND.
ContributorsBurke, Michael F., Wilson, George, Denton, Bonner
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
LanguageEnglish
Detected LanguageEnglish
Typetext, Dissertation-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0018 seconds