Accurate determination of the pressure losses at the bit is very important for drilling practices in petroleum industry. In the literature, there are several studies on determination of the pressure losses. Major focus is concentrated on single phase drilling fluids, which is far from accurate estimation of pressure losses for multiphase fluids, i.e., fluids including a liquid and a gas phase, at the bit. Some of these models are valid for multiphase fluids, however, they are either valid for very high gas flow rates, or developed using very strong assumptions.
This study presents a mathematical model for calculating bit hydraulics for gasified drilling fluids. The theory, which is valid for both sonic (critical) and subsonic (sub-critical) regimes, is based on the solution of the general energy equation for compressible fluid flow. The model is sensitive to changes in internal energy, temperature and compressibility. In addition, the model uses &ldquo / mixture sound velocity&rdquo / approach.
A computer program is developed based on the proposed mathematical model. The program calculates pressure drop through a nozzle in subsonic flow region, and suggest flow rate if the calculated pressure drop values is in the sonic flow pressure ranges.
The program has been run at reasonable field data. The results of the models have been compared with the results of existing models in the literature. The results show that the pressure losses through the bit can be estimated with a variation less than 9%. Also, it has been observed that bottom hole pressure, velocity of the liquid phase and nozzle size have a strong influence on bit pressure drop.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12604906/index.pdf |
Date | 01 April 2004 |
Creators | Dogan, Huseyin Ali |
Contributors | Ozbayoglu, Evren Mehmet |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0019 seconds