Thesis (M.Pharm. (Pharmaceutics) -- University of Limpopo, 2018 / Griseofulvin is an antibiotic fungistatic drug used in the treatment of dermatophyte and ringworm infections. About 50% of a dose of griseofulvin passes the gastro- intestinal tract unabsorbed and is excreted in faeces. Since griseofulvin is highly soluble in acidic pH, a gastro-retentive floating matrix system was developed to control dissolution rate and thereby enhance solubility in an effort to develop an improved and convenient dosage form.
Preformulation studies included selection of excipients and evaluation of their compatibility with griseofulvin. Using the chosen excipients, floating tablets of griseofulvin were formulated. Floating tablets containing 100 mg of griseofulvin were prepared by wet granulation technique with varying ratios of Methocel™, Accurel MP and Polyvinylpyrrolidone as determined by Design Expert software. Pre and post-compression studies, buoyancy capability and dissolution studies were carried out to assess the influence of the tablet components.
Results obtained revealed that a density of less than 0.00091 g/cm3 was necessary for tablet floatation. Tablets that float immediately upon contact with dissolution medium and continue floating for over 12 hours were achieved with at least 28% Accurel MP by mass of the tablet. Dissolution studies revealed that an increase in tablet hardness reduced the rate of griseofulvin release only up to 120 minutes. From 120 minutes onwards, tablet hardness had no significant influence on griseofulvin release from tablets. Methocel™ had the most significant influence on griseofulvin release. The amount of Methocel™ included in the formulation was indirectly proportional to the rate of griseofulvin release.
Using Design Expert software, optimized formulation was achieved with 1% Polyvinylpyrrolidone, 30% Methocel™, 60% Accurel MP and hardness ranging between 8 – 9 N. Pre and post-compression parameters of the optimized tablets were found to be within pharmacopoeial limits and thus compressed tablets were of acceptable quality. Tablets produced floated immediately upon contact with the medium and remained floating for at least 12 hours. Griseofulvin was released from the optimized tablets in a near zero order fashion, with a total of 80.8% griseofulvin released at the end of the 12 hour dissolution test period. Results of accelerated stability studies indicated potential stability of the manufactured tablets months.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:ul/oai:ulspace.ul.ac.za:10386/2228 |
| Date | January 2018 |
| Creators | Chanyandura, Jonathan Tinotenda |
| Contributors | Poka, M. S. |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | xix, 125 leaves |
| Relation |
Page generated in 0.0018 seconds