The task in this project is to design a generator for a vertical axis wind turbine withpower rated to 20kW at a wind speed of 10m/s. The project is conducted at theDivision of Electricity at Uppsala University with collaboration from ElectricGeneration AB. The design has just a few moving parts, which decreases maintenancecosts and increases its toughness. The turbine absorbs wind from every direction butits rotation speed ratio is lower than horizontal axis wind turbines. It means that thegenerator must be bigger and therefore more expensive. Price is an importantcriterion for the generator. Neodymium magnets are expensive so the amount of thismaterial must be limited.Several designs have been simulated but one final design has proven the mostpromising. It fulfills all specifications such as efficiency above 95%, 20kW outputpower and it also has a relatively low amount of hard magnetic material.A design with a single row of cables per slot was decided upon to eliminate heatpockets between cable rows, which can occur in designs with two cable rows perslot. It would be interesting to study designs with two or more cable rows per slot, asit could lead to a smaller and more efficient machine.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-177309 |
| Date | January 2012 |
| Creators | Rynkiewicz, Mateusz |
| Publisher | Uppsala universitet, Elektricitetslära |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.001 seconds