A computer-based method for determining the orientation of planar geological structures from remotely sensed images, utilizing digital geological images and digital elevation models (DEMs), is developed and assessed. The method relies on operator skill and experience to recognize geological structure traces on images, and then employs software routines (GEOSTRUC©) to calculate the orientation of selected structures. The operator selects three points on the trace of a planar geological feature as seen on a digital geological image that is co registered with a DEM of the same area. The orientation of the plane that contains the three points is determined using vector algebra equations. The program generates an ASCII data file which contains the orientation data as well as the geographical location of the measurements. This ASCII file can then be utilized in further analysis of the orientation data. The software development kit (SDK) for TNTmips v5.00, from MicroImages Inc. and operating in the X Windows environment, was employed to construct the software. The Watcom C\C++ Development Environment was used to generate the executable program, GEOSTRUC© . GEOSTRUC© was tested in two case studies. The case studies utilized digital data derived from the use of different techniques and from different sources which varied in scale and resolution. This was done to illustrate the versatility of the program and its application to a wide range of data types. On the whole, the results obtained using the GEOSTRUC© analyses compare favourably to field data from each test area. Use of the method to determine the orientation of axial planes in the case study revealed the usefulness of the method as a powerful analytic tool for use on a macroscopic scale. The method should not he applied in area with low variation in relief as the method proved to be less accurate in these areas. Advancements in imaging technology will serve to create images with better resolution, which will, in turn, improve the overall accuracy of the method.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:5001 |
Date | January 1996 |
Creators | Slabber, Frans Bresler |
Publisher | Rhodes University, Faculty of Science, Geology |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis, Masters, MSc |
Format | 173 p., pdf |
Rights | Slabber, Frans Bresler |
Page generated in 0.0128 seconds