The temperature and thermal stress distributions and variations of the high power LED module were studied in this work. The thermal-elastic-plastic 3D finite element models of MSC.marc software package are employed to simulate these performances for the high power LED module. Two high power white light LED module designs are investigated¡G one is the traditional phosphorescent silicone with blue LED module and the other is a phosphor glass lens with blue LED module. The distributions of temperature and thermal stress of in these two operating LED modules are compared and discussed. The effects of different packaging parameters¡Ge.g. bonding materials, substrate materials, lens materials on the temperature and thermal stress have also been studied in this work. The simulated results reveal that the serious thermal crack may occur for these two designs if the power of single die is over 10 watt. The simulated results also indicate that an attached fin cooler may improve these thermal crack disadvantaged significantly. The effect of fin design parameters on the peak temperature reduction has studied. A feasible fin design for the high power LED module has also been proposed.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0718112-135700 |
| Date | 18 July 2012 |
| Creators | Huang, Pin-che |
| Contributors | none, none, Jao-hwa Kuang, none, none |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0718112-135700 |
| Rights | user_define, Copyright information available at source archive |
Page generated in 0.0021 seconds