Electrochemical oxidation of acyclovir at glassy-carbone electrode and boron-doped diamond electrode gives one pH-dependent oxidation signal; the corresponding electrode reaction is controlled by diffusion. It is followed by a second indistinctive signal in the pH range 2,0 - 9,0. Further, optimization of conditions was carried out for determination of acyclovir using DC and DP voltammetry. The calibration dependence on GC electrode in B−R buffer (pH = 6,0) is linear only in the concentration range from 2 to 10 μmol∙l−1 for DCV with limit of detection 0,38 μmol∙l−1; for DPV it is not linear. BDD electrode has to be activated to prevent its passivation. Anodic activation at +2,4 V for 15 s with simultaneous stirring of solution results in relative standard deviation of 0,9% for acyclovir concentration of 1∙10−4 mol∙l−1. Using DCV and DPV methods linear concentration dependences were obtained in 0,1 mol∙l-1 nitric acid and in pH 6,0 B−R buffer. The lowest limit of detection and limit of quantification (LOD = 0,47 μmol∙l−1 a LOQ = 1,55 μmol∙l−1) and linear range from 0,6 to 100 μmol∙l−1 was reached in pH 6,0 B−R buffer. Further, standard addition method was used to quantify acyclovir in Zovirax tablets. Satisfactory recoveries of 101,1 ± 2,3 % using DCV and 98,8 ± 2,2 % using DPV at BDD (compared with the...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:339203 |
| Date | January 2014 |
| Creators | Vaněčková, Eva |
| Contributors | Schwarzová, Karolina, Fischer, Jan |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0139 seconds