Return to search

The Structural Disjoining Potential of Grain Boundary Premelting in Binary Alloys using Phase Field Crystal Model

<p>A framework is described using the phase-field crystal model for the study of premelting in binary alloys through short-range interfacial interactions that arise from the structure of grain boundaries. A nonconserved model A formulation of PFC was used to model grain boundaries in two dimensions for several different angles of misorientation: 27.8, 21.8, 17.8, 13.2, and 5 degrees. The character of the premelting transition, whereby a liquid-like film develops at a defect at temperatures below the melting point, changed with misorientation angle. An excess mass over the grain boundary can be defined as an analog to the liquid layer thickness due to premelting. It is found that low-angle grain boundaries remain at a relatively constant value of excess mass, and indeed can remain solid above the melting point. High-angle grain boundaries have a logarithmically increasing width that diverges at the melting point. A width-dependent energy can be defined called the disjoining potential that takes into account structure, interfacial and bulk energies to describe the liquid-layer width. The form of this disjoinging potential was found to be exponential and monotonically decreased as width increased for high angles and produced an attractive minimum for low angles. The results of this work were compared to a pure material from a previous study.</p> / Master of Applied Science (MASc)

Identiferoai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/13010
Date10 1900
CreatorsRowan, Elizabeth
ContributorsProvatas, Nikolas, Hoyt, Jeffrey, Zurob, Hatem, Materials Science
Source SetsMcMaster University
Detected LanguageEnglish
Typethesis

Page generated in 0.0016 seconds