Return to search

Quasi-Three Dimensional Experiments on Liquid-Solid Fluidized Bed of Three Different Particles in Two Different Distributors

This thesis is an experimental study of the fluidization of binary mixture in particulate flows. A fluidized bed with two distributors was built with water being used as carrying fluid. Three types of solid particles of nylon, glass and aluminum of the same size and different densities are used in the experiments. The wall effect on a single particle fluidization, the fluidization of binary mixture of large density difference (nylon and aluminum of density ratio of 0.42), and the fluidization of binary mixture of close density (glass and aluminum with density ratio of 0.91) were investigated. Also, the effect of distributors on mono-disperse and bi-disperse particle fluidization was investigated. Results show that the presence of narrow walls reduces the minimum fluidization velocity for a single particle by as much as nearly 40%. Also, in the case of binary mixture of close density particles, uniform mixing was easily achieved and no segregation was observed, but in the case of large density difference particles, there exists significant segregation and separation. At high velocity, the uniform distributor behaves like a transport bed. To achieve a full bed in the single jet, it requires 1.5 times velocity of the uniform distributor. This behavior determines their application in the industries.

Identiferoai:union.ndltd.org:unt.edu/info:ark/67531/metadc12173
Date12 1900
CreatorsObuseh, Chukwuyem Charles
ContributorsFeng, Zhi-Gang, Boetcher, Sandra, Choi, Tae-Youl
PublisherUniversity of North Texas
Source SetsUniversity of North Texas
LanguageEnglish
Detected LanguageEnglish
TypeThesis or Dissertation
FormatText
RightsPublic, Copyright, Obuseh, Chukwuyem Charles, Copyright is held by the author, unless otherwise noted. All rights reserved.

Page generated in 0.0016 seconds