Filtering is a fundamental operation in image science in general and in medical image science in particular. The most central applications are image enhancement, registration, segmentation and feature extraction. Even though these applications involve non-linear processing a majority of the methodologies available rely on initial estimates using linear filters. Linear filtering is a well established cornerstone of signal processing, which is reflected by the overwhelming amount of literature on finite impulse response filters and their design. Standard techniques for multidimensional filtering are computationally intense. This leads to either a long computation time or a performance loss caused by approximations made in order to increase the computational efficiency. This dissertation presents a framework for realization of efficient multidimensional filters. A weighted least squares design criterion ensures preservation of the performance and the two techniques called filter networks and sub-filter sequences significantly reduce the computational demand. A filter network is a realization of a set of filters, which are decomposed into a structure of sparse sub-filters each with a low number of coefficients. Sparsity is here a key property to reduce the number of floating point operations required for filtering. Also, the network structure is important for efficiency, since it determines how the sub-filters contribute to several output nodes, allowing reduction or elimination of redundant computations. Filter networks, which is the main contribution of this dissertation, has many potential applications. The primary target of the research presented here has been local structure analysis and image enhancement. A filter network realization for local structure analysis in 3D shows a computational gain, in terms of multiplications required, which can exceed a factor 70 compared to standard convolution. For comparison, this filter network requires approximately the same amount of multiplications per signal sample as a single 2D filter. These results are purely algorithmic and are not in conflict with the use of hardware acceleration techniques such as parallel processing or graphics processing units (GPU). To get a flavor of the computation time required, a prototype implementation which makes use of filter networks carries out image enhancement in 3D, involving the computation of 16 filter responses, at an approximate speed of 1MVoxel/s on a standard PC.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-11271 |
Date | January 2008 |
Creators | Svensson, Björn |
Publisher | Linköpings universitet, Medicinsk informatik, Linköpings universitet, Tekniska högskolan, Institutionen för medicinsk teknik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | Linköping Studies in Science and Technology. Dissertations, 0345-7524 ; 1171 |
Page generated in 0.003 seconds