Return to search

Low-cost small-scale wind power generation.

This research investigates a low-cost generator and power electronics unit for smallscale (<10kW) wind turbines, for both standalone and grid-connected applications. The proposed system uses a high-inductance permanent magnet generator together with a switched-mode rectifier (SMR) to produce a variable magnitude output current. The high inductance characteristic allows the generator to operate as a current source, which has the following advantages over conventional low-inductance generator (voltage source) systems: it offers simple control, and avoids the need for bulky / costly energy storage elements, such as capacitors and inductors. The SMR duty-cycle is controlled in an open-loop manner such that 1) maximum power is obtained for wind speeds below rated, and 2) the output power and turbine speed is limited to safe values above rated wind speed. This topology also has the ability to extract power at low wind speeds, which is well suited to small-scale wind turbines, as there is often limited flexibility in their location and these commonly see low average wind speeds. The thesis is divided into two parts; the first part examines the use of the SMR as a DC-DC converter, for use in standalone applications. The duty-cycle is essentially kept constant, and is only varied for maximum power tracking and turbine speed / power limiting purposes. The SMR operates in to a fixed voltage source load, and has the ability to allow current and hence power to be drawn from the generator even at low wind and hence turbine speeds, making it ideal for battery charging applications. Initial dynamometer testing and limited wind-tunnel testing of a commercially available wind turbine show that turbine power can be maximised and its speed can be limited by adjusting the SMR duty-cycle in an open-loop manner. The second part of the thesis examines the use of the SMR as a DC-AC converter for grid-connected applications. The duty-cycle is now modulated sinusoidally at the mains frequency such that the SMR produces an output current that resembles a fullwave rectified sinewave that is synchronised to the mains voltage. An additional H-bridge inverter circuit and low-pass filter is used to unfold, filter and feed the sinusoidal output current in to the utility grid. Simulation and initial resistive load and preliminary grid-connected tests were used to prove the inverter concept, however, the permanent magnet generator current source is identified as non-ideal and causes unwanted harmonic distortion. The generator harmonics are analysed, and the system performance is compared with the Australian Standard THD requirement. It is concluded that the harmonics are caused by 1) the low-cost single-phase output design, 2) the use of an uncontrolled rectifier, and 3) the finite back-EMF voltage. The extent of these harmonics can be predicted based on the inverter operating conditions. A feed-forward current compensation control algorithm is investigated, and shown to be effective at removing the harmonics caused by the nonideal current source. In addition, the unipolar PWM switching scheme, and its harmonic components are analysed. The low-pass filter design is discussed, with an emphasis on power factor and THD grid requirements. A normalised filter design approach is used that shows how design aspects, such as cutoff frequency and quality factor, affect the filter performance. The filter design is shown to be a trade-off between the output current THD, power loss, and quality factor. The final chapter summarises the thesis with the design and simulation of a 1kW single-phase grid-connected inverter. The inverter is designed based on the low-pass filter and feed-forward compensation analysis, and is shown to deliver an output current to the utility grid that adheres to the Australian Standards. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1375316 / Thesis (Ph.D.) - University of Adelaide, School of Electrical and Electronic Engineering, 2009

Identiferoai:union.ndltd.org:ADTP/288070
Date January 2009
CreatorsWhaley, David Michael
Source SetsAustraliasian Digital Theses Program
Detected LanguageEnglish

Page generated in 0.0017 seconds