In this thesis a methodology for measuring vibrations has been produced andinvestigated for APID 60, a rotorcraft in a Vertical Take-off and landing remotelypiloted aircraft system (VTOL RPAS). A comparative study was carried out forthe purpose of identifying the methodology with respect to design modificationscommon to the APID 60. The pilot-study identified experimental modal analysis(EMA) as a feasible part of the methodology for experimentally extracting themodal parameters of a structure. The EMA was performed on the main frameof the APID 60 where an impact hammer test was chosen as the technique forextracting the response data. As a comparison a point mass was added to thestructure to alter the dynamic properties and the test was repeated.The results from the EMA was compared with a modal analysis performednumerically with a calculation software. Comparison of the results from EMAwith the modal analysis performed numerically indicates consistency. This confirmsa good reliability of the methodology produced. However, the structure onwhich the test were preformed is simple in terms of constant structural properties.Further work should therefore investigate whether this methodology of measuringvibrations could be successfully applied to a structure with higher complexity.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-142928 |
| Date | January 2017 |
| Creators | Krantz, Dino |
| Publisher | Linköpings universitet, Fluida och mekatroniska system |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0015 seconds