The aim of this master’s thesis was to create a component model of a door handle stiffener used by the Volkswagen concern, which can be used for crash computations. Also to tune its parameters the way, its behavior corresponds the most to the real part’s. In the theoretical part the current regulations of the Euro NCAP are presented, concerning the testing and evaluation of the passive safety of new vehicles. Attention is focused on the evaluation of the side impact barrier tests, where the effect of the door handle stiffener’s damage is reflected the most. Shown are the reasons for the effort to simulate the real behavior of the stiffener, the factors, which initialized the born of the studied problem. The practical part starts with the creation of the FEM mesh of the part based on its 3D CAD model, also describes the requirements for the mesh quality, as well as the used tools and methods. Further on investigated are the characters of real damages of the door handle area during side impacts, based on which the component tests are proposed for the validation of the simulation model. Experimental research consists of the stiffener’s testing for simple bend and twist loads, three specimens each. After the execution of the tests the results get compared with the corresponding simulations. Modifications are made on the model according to the acquired results: refinement of the FEM mesh, new material model usage with failure for shell elements and definition of real material characteristics for the used thermoplastics. The latest obtained simulation dependencies are compared with the measured values again, the results are evaluated at last.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230249 |
Date | January 2012 |
Creators | Raffai, Peter |
Contributors | Korouš, Jan, Ramík, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Slovak |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.2649 seconds