This dissertation thesis deals with determination of the mechanical properties of weld materials based on instrumented hardness test. This work was caused by the research project between IAM Brno Ltd and CEZ corp., when the task was to develop a methodology for evaluation of mechanical material properties using NDT methods. For these reasons the development of methodology is reflected especially for use in practice focusing to determining the mechanical properties of the heterogeneous weld joint on the assembled equipment. The mechanical material properties are determined by carrying out non-destructive tests of the instrumented Vickers hardness. The developed methodology for determining of basic mechanical properties is based on the principle of inverse FEM modeling of the instrumented hardness tests, when output of the testing is indentation curve and measured surface imprint after unloading. The basic material mechanical properties are achieved by comparing the outputs of the experimental instrumented hardness tests and the outputs of the modeled hardness test using FEM.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234833 |
| Date | January 2016 |
| Creators | Stodola, Martin |
| Contributors | Španiel, Miroslav, Dlouhý, Ivo, Junek, Lubomír |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds