As embedded systems designers increasingly turn to programmable logic technologies in place of off-the-shelf microprocessors, there is a growing interest in the development of optimised custom processing cores that can be designed on a per-application basis. FPGAs blur the traditional distinction between hardware and software and offer the promise of application specific hardware acceleration. But realizing this in a general sense requires a significant departure from traditional embedded systems development flows. Whereas off-the-shelf processors have a fixed architecture, the same cannot be said of purpose-built FPGA-based processors. With this freedom comes the challenge of empirically determining the optimal boundary point between hardware and software. The fluidity of the hardware/software partition also poses an interesting challenge for compiler developers. This thesis presents a tool and methodology that addresses these codesign challenges in a new way. Described as 'compiler-directed codesign', it makes use of a suitably modified compiler to help direct the development of a custom processor core on a per-application basis. By exposing the compiler's internal representation of a compiled target program, visibility into those instructions, and hardware resources, that are most sought after by the compiler can be gained. This information is then used to inform further processor development and to determine the optimal partition between hardware and software. At each design iteration, the machine model is updated to reflect the available hardware resources, the compiler is rebuilt, and the target application is compiled once again. By including the compiler 'in-the-loop' of custom processor design, developers can accurately quantify the impact on performance caused by the addition or removal of specific hardware resources and iteratively converge on an optimal solution. Compiler Directed Codesign has advantages over existing codesign methodologies because it offers both a concrete point from which to begin the partitioning process as well as providing quantifiable and rapid feedback of the merits of different partitioning choices. When applied to an Adaptive PCM Encoder/Decoder case study, the Compiler Directed Codesign technique yielded a custom processor core that was between 36% and 73% smaller, consumed between 11% to 19% less memory, and performed up to 10X faster than comparable general-purpose FPGA-based processor cores. The conclusion of this work is that a suitably modified compiler can serve a valuable role in directing hardware/software partitioning on a per-application basis.
| Identifer | oai:union.ndltd.org:ADTP/210477 |
| Date | January 2008 |
| Creators | Hauff, Martin Anthony, marty@extendabilities.com.au |
| Publisher | RMIT University. Electrical and Computer Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://www.rmit.edu.au/help/disclaimer, Copyright Martin Anthony Hauff |
Page generated in 0.0028 seconds