Determination of the heat transfer coefficients for natural and mixed convection in horizontal annuli is important for designing double pipe heat exchangers and for energy storage systems. In part one and two of this study, the 2D numerical solution of the laminar natural convection of water in six internally finned horizontal annuli has been obtained. The fins are attached to the external surface of the inner cylinder. Only the symmetrical half of the horizontal annulus with three equally spaced longitudinal divergent solid and porous fins are considered. The parameters of the problem are Rayleigh number, fin height, permeability and porosity of the porous fin, etc. The above parameters are suitably varied to ascertain their effects on fluid flow and heat transfer. The results show that traditional solid fins provide much higher heat transfer rates compared to the porous fins. Part three of this work deals with mixed convective heat transfer (laminar natural and forced convections) of water in a vented annulus. The forced flow conditions are imposed by providing an inlet at the top and an outlet at the bottom. For various parameters of the problem, the average and local Nusselt numbers along the inner cylinder are calculated for water for both aiding and opposing flows. The fourth part of this study deals with numerical modeling of natural convection of nanofluids in a horizontal cylindrical annulus. Simulations are carried out for Cu-water nanofluids. The results, in general, show that nanoparticles systematically decrease the natural convective heat transfer coefficient on the inner cylinder. Practical and useful correlations are provided for calculating average heat transfer rates from the inner cylinder in the form of average equivalent thermal conductivity and average Nusselt number for all of the four cases discussed above. These correlations are new and will be helpful in designing heat exchangers.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.112556 |
| Date | January 2007 |
| Creators | Begum, Latifa. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Engineering (Department of Mining and Materials Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 002710356, proquestno: AAIMR51446, Theses scanned by UMI/ProQuest. |
Page generated in 0.0019 seconds