Return to search

Design Configurations and Operating Limitations of an Oscillating Heat Pipe

Passive and compact heat dissipation systems are and will remain vital for the successful operation of modern electronic systems. Oscillating heat pipes (OHPs) have been a part of this research area since their inception due to their ability to passively manage high heat fluxes. In the current investigation, different designs of tubular, flat plate, and multiple layer oscillating heat pipes are studied by using different operating parameters to investigate the operating limitations of each design. Furthermore, selective laser melting was demonstrated as a new OHP manufacturing technique and was used to create a compact multiple layer flat plate OHP. A 7-turn tubular oscillating heat pipe (T-OHP) was created and tested experimentally with three working fluids (water, acetone, and n-pentane) and different orientations (horizontal, vertical top heating, and vertical bottom heating). For vertical, T-OHP was tested with the condenser at 0°, 45° and 90° bend angle from the y-axis (achieved by bending the OHP in the adiabatic) in both bottom and top heating modes. The results show that T-OHP thermal performance depends on the bend angle, working fluid, and orientation. Another design of L-shape closed loop square microchannel (750 x 750 microns) copper heat pipe was fabricated from copper to create a thermal connector with thermal resistance < 0.09 ˚C/W for electronic boards. The TC-OHP was able to manage heat rates up to 250 W. A laser powder bed fusion (L-PBF) additive manufacturing (AM) method was employed for fabricating a multi-layered, Ti-6Al-4V oscillating heat pipe (ML-OHP). The 50.8 x 38.1 x 15.75 mm3 ML-OHP consisted of four inter-connected layers of circular mini-channels, as well an integrated, hermetic-grade fill port. A series of experiments were conducted to characterize the ML-OHP thermal performance by varying power input (up to 50 W), working fluid (water, acetone, NovecTM 7200, and n-pentane), and operating orientation (vertical bottom-heating, horizontal, and vertical top-heating). The ML-OHP was found to operate effectively for all working fluids and orientations investigated, demonstrating that the OHP can function in a multi-layered form, and further indicating that one can ‘stack’ multiple, interconnected OHPs within flat media for increased thermal management.

Identiferoai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-2300
Date11 August 2017
CreatorsIbrahim, Omar Talal
PublisherScholars Junction
Source SetsMississippi State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations

Page generated in 0.0015 seconds