Return to search

SPRAY OVERLAP AND HEAT TRANSFER COEFFICIENT UNIFORMITY IN CONTINUOUS CASTING

<p>Firstly, select a nozzle and get all its parameters like spray angle, mass flow rate, dipersion angle and nozzle diameter. Create a domain in which 2 nozzles can fit, as shown in thesis. Divide the domain in 2 zones and perform fine mesh on the top surface of solid surface where spray will heat. Write a function for slab temperature variation and give it as the solid part input. Use DPM model, to create injectors inside the domain and solve.</p>

  1. 10.25394/pgs.22766273.v1
Identiferoai:union.ndltd.org:purdue.edu/oai:figshare.com:article/22766273
Date04 May 2023
CreatorsNinad Sandeep Patil (15412307)
Source SetsPurdue University
Detected LanguageEnglish
TypeText, Thesis
RightsCC BY 4.0
Relationhttps://figshare.com/articles/thesis/SPRAY_OVERLAP_AND_HEAT_TRANSFER_COEFFICIENT_UNIFORMITY_IN_CONTINUOUS_CASTING/22766273

Page generated in 0.0021 seconds