A numerical analysis is performed for the three-dimensional, turbulent flow of air in a thyristor valve hall located at the Dorsey Converter Station, owned and operated by Manitoba Hydro. The goal of this analysis was to determine the configurations that result in increased air-side cooling effectiveness in the valve hall. The governing equations are solved using the Computational Fluid Dynamics (CFD) code CFX-5. This computer code uses a finite volume method of solution and is based on a finite element approach for representing the geometry. The effects of inlet and outlet opening geometry, inlet air mass flow rate, and inlet air angle on the thermal performance for the air-side cooling of the thyristor valve hall geometry are examined. / May 2006
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:MWU.anitoba.ca/dspace#1993/237 |
| Date | 10 April 2006 |
| Creators | Berg, Jeffrey R |
| Contributors | Soliman, Hassan (Mechanical and Manufacturing Engineering) Ormiston, Scott (Mechanical and Manufacturing Engineering), Soliman, Hassan (Mechanical and Manufacturing Engineering) Ormiston, Scott (Mechanical and Manufacturing Engineering) Bibeau, Eric (Mechanical and Manufacturing Engineering) Ciric, Ioan (Electrical and Computer Engineering) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_US |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | 11076581 bytes, application/pdf |
Page generated in 0.0023 seconds