Placing wave energy devices within close proximity to each other can be beneficial as the costs of deployment, maintenance and infrastructure are reduced significantly compared to if the devices are deployed in isolation. A mathematical model is presented in this thesis which combines linear wave theory with a series of linear driven harmonic oscillators to model an array (group) of floating wave energy devices which move predominantly in heave (vertically) in a train of incident regular waves. Whilst similar mathematical models have been used previously to investigate interactions between fluids and groups of structures, much of the published work does not address array configurations or device constraints that are relevant to designers of structure-supported array devices. The suitability of linear theory for application to closely spaced arrays is assessed in this thesis through comparison to small-scale experimental data and by evaluation of the magnitude of second-order hydrodynamic forces. Values of mechanical damping and mass are determined for each element of an array in order to achieve the maximum power from an array of floats without requiring the knowledge of the motion of every float within the array in order to apply the forces to any one float. Further to this, the analysis of floats of varying geometry is performed in order to assess the possibility of array optimisation through the variation of float geometries within a closely spaced array.It is shown in this thesis that linear theory provides a reasonable prediction of the response of floats that are sufficiently close together to interact for most wave frequencies to which the arrays are likely to be subjected. Under the assumption of easily implementable mechanical damping, it is determined that the power output from an array of floats of equal geometry can be increased by specifying different magnitudes of mechanical damping on each float independently of the radiation damping. Variations in submerged float geometries for the purpose of manipulating array characteristics according to the incident wave frequency are best applied through the variation in draft of a single geometry. Variations in submerged float geometry which occur close to the free surface are found to be of the greatest significance. Where the float is uniform in cross-section, the most appropriate method to select float drafts within an array is found to be based on the evaluation of the total damping on each float.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:549340 |
| Date | January 2011 |
| Creators | Bellew, Sarah Louise |
| Contributors | Stallard, Timothy ; Stansby, Peter |
| Publisher | University of Manchester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://www.research.manchester.ac.uk/portal/en/theses/investigation-of-the-response-of-groups-of-wave-energy-devices(3db5db0d-a6af-4715-9f0b-19d53cf6dcf4).html |
Page generated in 0.0019 seconds