The diploma thesis is focused on the milling strategies and their suitability for the production of complicated sculptured surfaces using a three-axe milling center and the operation system Heidenhain iTNC 530. The behavior of the tools and the results of the individual milled samples were monitored under changing milling strategies during the experiment. The outcomes of the experiment were seven milled samples and an assessment of the effect of the Machine – Tool – Workpiece system toughness. In addition, the suitability of the milling strategies were evaluated in consideration to the quality of the milled surface and the production time.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231152 |
Date | January 2014 |
Creators | Břínek, Martin |
Contributors | Polzer, Aleš, Píška, Miroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0116 seconds