Return to search

Density functional tight-binding and cluster expansion studies of lithiated/sodiated silicon anodes for high-energy-density batteries

Thesis (Ph.D. (Physics)) -- University of Limpopo, 2020 / This work presents a computational modelling workflow that uniquely combines
several techniques, proposed as a means for studying and designing high-energy-density electrodes for the next-generation of rechargeable batteries within the era of
the fourth industrial revolution (4IR).
The Self-Consistent Charge Density Functional-based Tight Binding (SCC-DFTB)
parameterisation scheme for the Li-Si and Na-Si systems is presented. By using the
Li-Si system, a procedure for developing the Slater-Koster based potentials is
shown. Using lessons learned from the Li-Si framework, the parameterisation of the
Na-Si is reported. The Li-Si SCC-DFTB parameter set has been developed to handle
environments that consist of Si-Si, Li-Si and Li-Li interactions; and the Na-Si SCC DFTB parameter set is developed for Na-Na, Na-Si, and Si-Si interactions.
Validations and applications of the developed sets are illustrated and discussed.
By calculating equilibrium lattice constants, the Li-Si set is shown to be compatible
with various phases in the crystalline Li-Si system. The results were generally within
a margin of less than 8% difference, with some values such as that of the cubic
Li22Si5 being in agreement with experiments to within 1%. The volume expansion of
Si as a function of Li insertion was successfully modelled via the Li-Si SCC-DFTB
parameter set. It was shown that Si gradually expands in volume from 53.6% for the
LiSi phase composed of 50 atm % Li, to 261.57% for Li15Si4 with 78.95 atm % Li, and
eventually shoots over 300% for the Li22Si5 phase with the expansion at 316.45%,
which agrees with experiments.
Furthermore, the ability of the Li-Si SCC-DFTB parameter set to model the
mechanical properties of Si is evaluated by calculating the mechanical properties of
pristine cubic Si. The parameter set was able to produce the mechanical properties
of Si, which agree with experiments to within 6%. The SCC-DFTB parameter set was
then used to model the volume expansion of amorphous silicon (a-Si) as a result of
lithiation within concentrations ranging from 33 – 50 atm % Li. Consistent with
experiments, the a-Si was found to marginally expand in a linear form with increase
in Li content. a-Si was observed to exhibit a lower expansion compared to c-Si.
Additionally, the structural stability of the amorphous Li-Si alloys was examined, and
observations agree with experiments.vi
The Na-Si SCC-DFTB parameter set produced equilibrium lattice parameters that
agree with experiments to within 4% for reference structures, and the transferability
was tested on three Na-Si clathrate compounds (i.e. the Pm-3n Na8Si46, the Cmcm
NaSi6 and Fd-3m Na24Si136).
By employing the approach used when lithiating Si, the sodiation of crystalline silicon
(c-Si) was modelled. It was predicted that c-Si expands by over 400% at 77 atm%
Na and shoots above 500% for concentrations exceeding 80 atm% of Na. By
comparing how c-Si expands as a result of lithiation to the expansion consequent to
sodiation for concentrations ranging from 66.6 – 81.4 atm%, c-Si is shown to be
unsuitable for Na-ion batteries. As a test, the ability of the developed Na-Si SCC DFTB parameter set to handle large and complex geometries was shown by
modelling the expansion of a-Si at 33 atm% Na. It was deduced that a-Si would be
more preferable for Na-ion batteries since at 33 atm% Na, a-Si expanded a lot less
than when c-Si was used. Using the Li-Si and the Na-Si SCC-DFTB parameter sets,
it was noted that amorphisation appears to lower the magnitude by which Si
expands, therefore agreeing with experiments in that amorphous structures are
reported to exhibit a buffering effect towards volume expansion.
The material space for the Li-Si alloy system is explored through crystal structure
predictions conducted via a machine learning powered cluster expansion (CE).
Using the FCC and BCC – based parent lattice in the grid search, 12
thermodynamically stable Li-Si alloys were predicted by the genetic algorithm. Viz.
the trigonal Li4Si (R-3m), tetragonal Li4Si (I4/m), tetragonal Li3Si (I4/mmm), cubic
Li3Si (Fm-3m), monoclinic Li2Si3 (C2/m), trigonal Li2Si (P-3m1), tetragonal LiSi
(P4/mmm), trigonal LiSi2 (P-2m1), monoclinic LiSi3 (P2/m), cubic LiSi3 (Pm-3m),
tetragonal LiSi4 (I4/m) and monoclinic LiSi4 (C2/m).
The structural stabilities of the predicted Li-Si alloys are further studied. With focus
on pressure, the thermodynamic conditions under which the Li-rich phase, Li4Si (R 3m), would be stable are tested. Li4Si (R-3m) was subjected to pressures during
geometry optimization and found to globally maintain its structural stability within the
range 0 – 25GPa. Hence, Li4Si was predicted to be a low pressure phase. In
studying the PDOS, the Li4Si (I4/m) was noted to be more stable around 40GPa and vii
45GPa, which is consistent with the prediction made from other works, wherein
intelligence-based techniques were used.
A test for exploring the Na-Si material space was done using insights acquired from
the Li-Si framework. Three thermodynamically stable Na-Si (i.e. the I4/mmm Na3Si,
P4/nmm NaSi and Immm NaSi2) were predicted. Using the Na-Si SCC-DFTB
parameter set, a correlation of the total DOS in the vicinity of the Fermi level (Ef) with
the structural stability of the three Na-Si alloys is done. NaSi (P4/nmm) was shown to
be unstable at 0GPa, NaSi2 (Immm) is found to be stable, and the Na-rich Na3Si
exhibited metastability. The stability of Na3Si was seen to improve when external
pressure ranging from 2.5 – 25GPa was applied; hence, suggesting Na3Si (I4/mmm)
to be a high-pressure phase. Furthermore, expanding on the groundwork laid from
the Li-Si and Na-Si CE, the Mg-Si system was tested to illustrate that the approach
can be used to rapidly screen for new materials. The ground-state crystal structure
search predicted 4 thermodynamically stable Mg-Si alloys. Viz. Mg3Si (Pm-3m),
MgSi (P4/mmm), MgSi2 (Immm) and MgSi3 (Pmmm).
Lastly, to highlight the power of combining various computational techniques to
advance material discovery and design, a framework linking SCC-DFTB and CE is
illustrated. Candidate electrode materials with nano-architectural features were
simulated by designing nanospheres comprised of more than 500 atoms, using the
predicted Li-Si and Na-Si crystal structures. The stability of the nanospheres was
examined using SCC-DFTB parameters developed herein. The workflow presented
in this work paves the way for rapid material discovery, which is sought for in the era
of the fourth industrial revolution. / National Cyber Infrastructure System: Center for High-Performance Computing
(NICIS-CHPC) for computing resources, the National Research Foundation (NRF)
and the University of Limpopo

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:ul/oai:ulspace.ul.ac.za:10386/3345
Date January 2020
CreatorsPhoshoko, Katlego William
ContributorsNgoepe, P. E.
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Formatxxvii, 207 leaves
RelationPDF

Page generated in 0.0028 seconds