The advancement in manufacturing technologies to produce high-performing engineered wood products (EWP) has allowed wood to be utilized beyond the traditional low-rise light-frame structures and to become a viable material option for much larger structures. Although glued-laminated timber (glulam) is included as a material option in the current blast code (CSA, 2012), its response to blast loading is not yet well documented.
An experimental program investigating the behaviour of seventy glulam beams and columns was developed with focus on establishing the dynamic characteristics of glulam beams and columns with and without the effect of FRP reinforcement. A shock tube capable of simulating high strain rates similar to those experienced during blast was used. Thirty-eight beams with three different cross-sections were tested statically and dynamically to establish the high strain rate effects (dynamic increase factor). Six columns were also tested dynamically with axial load levels ranging from 15 to 75 % of the columns’ compression design capacity. Different retrofit configurations varying from simple tension reinforcement to U-shaped tension reinforcement with confinement using both unidirectional and bi-directional FRP were investigated on a total of twenty-six beams.
A procedure capturing the strain-rate effects, variable axial load and FRP, was developed and found to be capable of predicting the flexural behaviour of the beams up to maximum resistance with reasonable accuracy when compared to experimentally obtained static and dynamic resistance curves. Implications on the design of both retrofitted and unretrofitted specimens are also discussed.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/36759 |
| Date | January 2017 |
| Creators | Lacroix, Daniel Normand |
| Contributors | Doudak, Ghasan |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0026 seconds