This PhD thesis is divided into two parts. Part one dealswith the development of the material and the mechanicalproperties of Steel Fibrous Cement Based Composites (SFCBC) forimproving bridge design and construction. It familiarizes thehydration mechanisms of the high performance concrete with thehelp of Powers´ and Jensen´s models. Concretes withdifferent water-cement ratio were compared with each other withrespect to degree of hydration and hydration products. Thisanalysis showed that high performance concrete has higherstrengths not because it has more gel solid, but due to ithaving less porosity and higher filler content compared toordinary concrete. A number of experiments were performed to achieve a mixdesign method for a SFCBC, which has good workability, highearly and long-term strength and good durabilitycharacteristics. A Self-compacting and self-leveling fibrouscomposite, which has ultra high strengths (Compressive strengthfc= 180 ~ 220MPa and flexural tensile strengthfföi= 14 ~ 32MPa depending on the volumefraction of fibers) was produced. This composite was alsotested under different curing conditions in order toinvestigate the effect of curing on hydration andself-desiccation shrinkage. These tests showed that SFCBCshould not be water-cured under a long period andself-desiccation influences the compressive strengthnegatively. Test of scaling at freezing showed that SFCBC hasvery good durability characteristics. Part two deals with the behavior of SFCBC in the anchoragezones of prestressed bridges. The prismatic composite specimenswere tested for different volume fractions of fibers underdifferent concentrations ratios of strip loading. The resultsof these tests showed that the ultimate strength of the SFCBCspecimens was approximately twice that of ordinary concretewith the same size (fc= 60MPa reinforced with stirrups). Therefore,SFCBC has good possibility to replace the traditional rebars inthe anchorage zones of prestressed bridges. This composite has different behavior than the traditionalconcrete e.g. crack formation, failure criteria, effectivestrength and angle of friction. A vertical crack on thecenterline was occurred while wedge developed under the loadingplate. In contrast to ordinary concrete, the cracks could notreach to the bottom of the blocks. The tests results gave the ideas of that this material actslike metals or plastics in the high fiber content. Thismaterial is neither very brittle as concrete nor very ductileas metals but it is somewhere between them. Upper-bound plasticity solutions were utilized for modelingthe bearing capacity of SFCBC. Predictions of this method aregood enough to estimate the bearing capacity of SFCBC in theanchorage zones of prestressed bridges. <b>Keywords:</b>Process improvement of bridges, Prestressedconcrete, High performance concrete, Ultra high performanceconcrete, Hydration, Cement based composites, Fibers,Self-compacting concrete, Bearing capacity, Anchorage zones,Tests
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-3844 |
| Date | January 2004 |
| Creators | Ay, Lutfi |
| Publisher | KTH, Byggvetenskap, Stockholm : Byggvetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, monograph, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Trita-BKN. Bulletin, 1103-4270 ; 75 |
Page generated in 0.0023 seconds