Master's thesis treat of optical connection. The aim of this work was also the practical implementation and successful testing. Communications signal is low frequency in the range of 20 to 15 kHz and intended length of the coupling is approximately 200 m. The first is the work carried out theoretical analysis issues. Then is described the design and implementation of its own facility. In conclusion, the measurement is done and evaluate the parameters. I have dealt the optical connection with using a laser beam that is modulated frequency modulation. This optical signal is converted in the receiver using a PIN photodiode (type PIN) back to the electrical signal. Then there is the demodulation and amplification. The frequency modulator and demodulator is phase lock loop. It realizes the type of circuit CMOS 4046. The work is designed properly functioning equipment. It serves for the transmission of speech and audio signal line. It has good properties that match the criteria. The connection can be used outdoors due to the use of cover. The scope of communication may be even greater than 200 meters
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218078 |
| Date | January 2009 |
| Creators | Horák, Jaroslav |
| Contributors | Mišurec, Jiří, Káňa, Ladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds