This thesis introduces issues of passenger car side-door hinges. Practical part of this thesis deals with modifying the current low-cost side-door hinge for Edscha Automotive Kamenice s.r.o. First, material was chosen to decrease weight while maintaining the required mechanical properties. Then follows the detail design of the hinge model, which was created in the software program Catia. Heat and surface treatments are described. Both treatments ensures the hinge's final features. To verify the strength of the hinge, tensile and sag test was simulated in Ansys. Subsequently, record from the consultation of the hinge's manufacturability in series and the hinge’s cutting plans are provided. At the end of the thesis, the assembling procedure is suggested. Final part of the thesis compares the developed low-cost hinge against two similar side door hinges.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:254288 |
| Date | January 2016 |
| Creators | Čermáková, Klára |
| Contributors | Kozman, Zdeněk, Píštěk, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0219 seconds