This diploma thesis deals with the topic of surface treatment of table tops in industrial production, specifically examines the influence of the rating film’s properties on its final resistence against the physico-mechanical and chemical factors. The underlying materials used are chipboards and in one case also bio-board. All samples were provided with one of three veneer types (oak, ash, walnut) and finished with transparent water-borne UV curable coatings. In some cases, the surface was treated with water-borne stains. The staining was done using HVLP spraying technology, the individual transparent lacquers were then sprayed with Airmix spraying technology. After curing and acclimatization, the surface of each sample was rewieved on the basis of its visual properties and physico-mechanical and chemical resistance. These properties were subsequently evaluated according to the relevant standards. The outcome is determination of the most suitable surface finish for table tops with high surface finish requirements.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:428001 |
| Date | January 2018 |
| Creators | Jarošová, Dagmar |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0039 seconds