The thesis is focused on the proposal of production of a stamped part of the uni-axial rod located in the axle of the truck. The uni-axial rod is made of materiál S420MC with thicknes of 4 mm and the planned series production is 84 000 pieces per year for 7 years. The most difficult point for production is a collar, which create support of the bushing. It is not posibble to produce a required height with conventional one-stage process, which was experimentally verified. In the programm PAM-STAMP there was designed multiple-stage process of the production with the use of numerical simulation. The progressive die was designed for this process of the production. Maximal load of a forming press is 5 057 kN. Production will be located on the forming press Kaiser 8000-50-F5-RKM by ANDRITZ Metals. Maximum force of the forming press is 8 000 kN.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:416625 |
| Date | January 2020 |
| Creators | Zejda, Václav |
| Contributors | Peterková, Eva, Řiháček, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds