Digital holographic microscopy is an interferometric imaging technique, the principle of which is the off-axis image plane holography. The principle of this technique enables to reconstruct both the image intensity and the image phase from the output interferencesignal. The reconstruction can be carried out on the basis of a single image plane hologram. This leads to the possibility of a realtime image reconstruction. The speed of the reconstruction depends on the detection and the computing process. The aim of this diploma thesis is to develop user software for the control of the detection camera and for the image plane hologram reconstruction. The effort was to achieve the highest number of image reconstructions per time unit, with the maximum utilization of the data transfer between the camera and the computer.The next aim of this thesis is the stabilization of the optical table position. The method of stabilization is based on the image phase information, which is used for the control loop feedback between reconstructed image phase and the piezoelectric actuator placed inside of the optical table. Experimental results, which prove the functionality of the stabilization, are presented.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228199 |
Date | January 2008 |
Creators | Kvasnica, Lukáš |
Contributors | Číp, Ondřej, Chmelík, Radim |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0995 seconds