We consider mathematical modeling of thin film flow between two rough surfaces which are in relative motion. For example such flows take place in different kinds of bearings and gears when a lubricant is used to reduce friction and wear between the surfaces. The mathematical foundations of lubrication theory is given by the Navier--Stokes equation, which describes the motion of viscous fluids. In thin domains several approximations are possible which lead to the so called Reynolds equation. This equation is crucial to describe the pressure in the lubricant film. When the pressure is found it is possible to predict vorous important physical quantities such as friction (stresses on the bounding surfaces), load carrying capacity and velocity field. In hydrodynamic lubrication the effect of surface roughness is not negligible, because in practical situations the amplitude of the surface roughness are of the same order as the film thickness. Moreover, a perfectly smooth surface does not exist in reality due to imperfections in the manufacturing process. Therefore, any realistic lubrication model should account for the effects of surface roughness. This implies that the mathematical modeling leads to partial differential equations with coefficients that will oscillate rapidly in space and time. A direct numerical computation is therefore very difficult, since an extremely dense mesh is needed to resolve the oscillations due to the surface roughness. A natural approach is to do some type of averaging. In this PhD thesis we use and develop modern homogenization theory to be able to handle the questions above. Especially, we use, develop and apply the method based on the multiple scale expansions and two-scale convergence. The thesis is based on five papers (A-E), with an appendix to paper A, and an extensive introduction, which puts these publications in a larger context. In Paper A the connection between the Stokes equation and the Reynolds equation is investigated. More precisely, the asymptotic behavior as both the film thickness <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?%5Cepsilon" /> and wavelength <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?%5Cmu" /> of the roughness tend to zero is analyzed and described. Three different limit equations are derived. Time-dependent equations of Reynolds type are obtained in all three cases (Stokes roughness, Reynolds roughness and high frequency roughness regime). In paper C we extend the work done in Paper A where we compare the roughness regimes by numeric computations for the stationary case. In paper B we present a mathematical model that takes into account cavitation, surfaces roughness and compressibility of the fluid. We compute the homogenized coefficients in the case of unidirectional roughness.In the paper D we derive a mathematical model of thin film flow between two close rough surfaces, which takes into account cavitation, surface roughness and pressure dependent density. Moreover, we use two-scale convergence to homogenize the model. Finally, in paper E we prove the existence of solutions to a frequently used mathematical model of thin film flow, which takes cavitation into account.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-59629 |
| Date | January 2016 |
| Creators | Tsandzana, Afonso Fernando |
| Publisher | Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Luleå |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, 1402-1544 |
Page generated in 0.002 seconds