Sprinkled tube bundles with a thin liquid film flowing over them are used in various technology processes where it is necessary to separate the vapour and liquid phases quickly and efficiently. The process occurs predominantly at low temperatures with a corresponding decrease of pressure around the tube bundle. Such a technology is represented for instance by an evaporator at absorption units or an evaporator for sea water desalination. In ideal conditions water boils at the whole surface of an exchanger, but in practice it must be considered that in original spots of contact between water and the exchanger wall the water will not boil at the tubes' surface but the cooling liquid will merely be heated-up. The presented dissertation thesis focuses on this issue. The objective of the thesis was to determine the heat transfer coefficient at the surface of sprinkled tube bundles of various geometries at atmospheric pressure as well as low pressure. For this purpose experiments have been carried out at tube bundles consisting of copper tubes of 12,0 mm diameter placed horizontally one above another that were heated by water. Three types of tubes (smooth, sandblasted and grooved) of four various pitches (15,0 to 30,0 mm by 5,0 mm increments) have been tested. Simultaneously individual bundles' geometries consisted of 4, 6, 8 and 10 tubes with identical surface finish. Based on the conducted experiments the mathematical model of heat transfer that involves mainly analogy criteria has been made more accurate. A temperature field at the sprinkled tube bundle surface has been scanned by a thermographic camera during the performed experiments. Influence of geometry and tube surface finish on flow mode and consequently also on heat transfer has been assessed in accordance with the compiled methodology.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:240776 |
| Date | January 2016 |
| Creators | Kracík, Petr |
| Contributors | Masaryk, Michal, Kořista, Milan, Pospíšil, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds